Optics - All Products

All HIVIZ sights are built to rigid standards using only the highest quality materials and shooter tested to ensure they'll withstand the test of time. LitePipes are made of a chemical resistant material and injection molded toa chieve maximum brightness and a consistent sight picture.

Bright: Sights are cut away in the center to allow maximum light gathering from any angle while retaining strength.
Interchangable: Includes a variety of LitePipe colors and sizes for any lighting condition.
Precise: Square sight profile for precision rear sight alignment.
Durable: All sight bases are solid steel construction.
Optically Efficient: Recessed LitePipe eliminates halo and reveals a crisp, clear dot.
Holster Friendly: HIVIZ pays strict attention to contouring all handgun sights to be as smooth and snag-free as possible.

Hunters Element spent a huge amount of time testing and designing prototypes before releasing their Bino Defender. They hunted for years with different bino protection systems, picking them apart and piecing them together until they finally produced what they feel to be the ultimate design.

They wanted their system to be slim-lined for less bulk while crawling through the scrub and the important ability to see your foot placement in dodgy terrain. The bino defender exploits a magnet release for the fastest and quietest possible entry, an easy access rain cover for additional protection in turbulent weather and 4 pockets for further essentials.

Features:
• Fits most 10x42 roof prism binos or smaller
• Air-flow foam for maximum breathability and minimum bulk
• Removable, adjustable, ergonomic, elasticated harness
• No-look puller with quiet but strong magnetic closure
• 4 pockets for wind checker, drop charts, etc
• Quality durable YKK® buckles
• Hidden elasticated rain cover
• Ultra-slim profile for cleaner foot placement.

The Hi-Viz LITEWAVE Fiber Optic Sight Set will put you on target faster and more efficiently than your standard stock front site. The bright crystal clear fiber optic dot is easy to acquire under nearly any lighting conditions. The housing is made from durable steel construction that will last for years. Upgrade the front sight on your Ruger 10/22 with the Hi Viz LITEWAVE Fiber Optic Sight Set.

Specifications and Features:
HiViz LITEWAVE HRBLW01
Front and rSight
Interchangeable LitePipes
Red, and Green, Fiber Optic
Steel Construction
Black Housing

Fits:
Ruger 10/22 with standard barrel including carbine and take down models.
Does not fit bull barrels

HI VIZ Litewave fiber optic rear sights gather and magnify ambient light to produce two glowing dots that are eye-catching and aid in rapid target acquisition. The unique Litewave design lets you quickly change colors quickly. The sight uses .070" diameter litepipes and comes with lightpipes in green, red and black. The litepipes store in the included litepipe changing key.

Features and Specifications:
Manufacturer Number: GLLW15
Fits: All GLOCK models in 9mm, .40 S&W and .357 SIG

Umarex Precision Air rifle Precision Scope.

Specifications:

• Magnification: 4x
• Objective Lens Diameter: 32mm
• Elevation and windage adjustments
• Manufacturer: Umarex

No respectable .22 rifle should be without one. These precision scopes make your outfit complete for every type of shooting, and you won't get a sharper scope than a BSA. Their parallax is set to 50 yards, and they come with rings that fit 3/8" bases. All .22 Special scopes are waterproof, fog proof and shockproof.

All BSA optics are suitable for use on spring-powered air rifles.

Features:
• 4x magnification
• Compact 32mm Objective Size
• Fully-coated optics for solid contrast and clarity
• 100% waterproof / fogproof / shockproof
• Comfortable 3½" eye relief
• F.O.V. @ 100 yds. is 34 feet
• ¼" MOA windage and elevation adjustment
• 50-yd. fixed parallax
• Weighs 9 oz
• Includes mounting rings.

These Outdoor Optics 4x32 scopes are one of the nicest of the value for money scopes we see. Not only are they an attractive looking scope, with their black matte finish and silver front ring, but optically they are very very good. Clear with good depth of field and the very popular duplex reticle, which is the standard found in 90% of most scopes.

The scope is fog and water proof, shock and recoil resistant, has fully coated lenses so you’ll get the clearest and sharpest picture and a good set of clear see through scope covers are also supplied. These scopes are well suited for 22, 22 Magnum, any of the 17s and could even be used on some of the smaller Centrefire rifles. The best thing of all is that they offer excellent value for money with a good warranty.

We also keep an excellent range of alloy and steel scope mounts suitable for this scope, and if you purchase the scope and rings from us, we would be more than happy to mount it for you.

Burris Rifle Scope 1" Zee Solid Steel Rings ( fits Weaver-style Bases )

Burris scope rings and bases have long been favourites of custom gunmakers because of their strength, beauty and fit. It's easy to recognize Burris' leadership role in scope mounting systems when you consider the myriad of innovative designs and manufacturing processes that result in rock-solid performance. Each Burris ring is made from a solid piece of steel with the top and bottom half perfectly mated.

If your eyes just aren't what they used to be, or you have trouble visualizing your front sight, HiViz has the answer for you! Having the right sight makes all the difference between a solid hit and a miss so why not get one that offers a bright sight picture allowing you to have faster target acquisition? HiViz's overmolded pistol sights are suited to the demands placed on duty pistols or rugged competition guns. These sights combine the strength of our durable LightPipes with an incredibly tough resin overmold that protects the sight while allowing light to reach the LitePipe.See the light and get faster on target with the HiViz fiber optic front sight.

Specifications and Features:

Front sight for Walther P22 and P22Q
Steel
Interchangeable LitePipes
Sight is equivalent to factory #3 front sight

Brought to you by Manitoba, this handy tan coloured binocular carry case with a built in shoulder harness allows you to take your favorite pair of binoculars virtually anywhere without the realistic fear of breakage or discomfort. The Manitoba bino case is fitted with a tough padded nylon construction that is built to handle excessive use - because after giving them a go, you'll not want to go without them again! Jammed packed with features including a zip compartment in the rear and two side mesh pockets for popular small items such as batteries, a knife/multitool, rangefinder or a torch.

Features

• Tough padded nylon construction
• Adjustable low profile shoulder straps for comfort
• Plenty of room for full size binos such as Ranger, Minox, Leica, Steiner, Bushnell, Leupold and more!
• Easy open and close, even when wearing gloves
• 2 Mesh side pockets + zippered rear pocket
• Built-in bino strap (that attaches directly to your own binos) prevents any accidental drops
• Manitoba's 1 year product warranty

Main Pocket Dimensions

14cm (H) 17cm (W) 8.5cm (L)

This Manitoba product comes with a 1 year guarantee of quality. If your Manitoba garment is found to be faulty in any way within 1 year of purchase, we will repair or replace it.

Be level whatever field you're playing on! The AccuTech Anti Cant is designed for 1" and 30mm rifle scope tubes and installs quickly and effortlessly with easy micro-level adjustments after installation. This ultra-rugged level sits higher and wider for more visibility and fast referencing. This system aids in the correction of "cant error," giving you dead-on true vertical hold to make sure you are on target.

A magnetic sight base offers easy installation without gunsmithing. Four different widths accommodate almost any shotgun. The bright fiber optic insert offers fast target acquisition in daylight and low light situations. Not compatible with fiber or aluminum ribs.

Specifications
Not compatible with fiber or aluminum ribs

If your eyes just aren't what they used to be, or you have trouble visualizing your front sight, HiViz has the answer for you! Having the right sight makes all the difference between a solid hit and a miss so why not get one that offers a bright sight picture allowing you to have faster target acquisition? HiViz's overmolded pistol sights are suited to the demands placed on duty pistols or rugged competition guns. These sights combine the strength of our durable LightPipes with an incredibly tough resin overmold that protects the sight while allowing light to reach the LitePipe.See the light and get faster on target with the HiViz fiber optic front sight.

Specifications and Features:

Snap on front sight for shotguns
Polymer
Interchangeable LitePipes

HI VIZ Glock Litewave Front Sight

Improved light gathering green fibre optic front sight for Glock.

Generation 3 interchangeable front sight
Diagonal-wave design for increased durability and brightest sight
Skeletonized sight body
Fits all Glock models including 41 and 42

If your eyes just aren't what they used to be, or you have trouble visualizing your front sight, HiViz has the answer for you! Having the right sight makes all the difference between a solid hit and a miss so why not get one that offers a bright sight picture allowing you to have faster target acquisition? HiViz's overmolded pistol sights are suited to the demands placed on duty pistols or rugged competition guns. These sights combine the strength of our durable LightPipes with an incredibly tough resin overmold that protects the sight while allowing light to reach the LitePipe.See the light and get faster on target with the HiViz fiber optic front sight.

Specifications and Features:
Front sight for 1911's
Steel
Interchangeable LitePipes

Night Saber spotlight mount makes it easy to attach spotlights on top of 1" or 30mm scopes. Very practical and easy to use with a quick detach too.

Accessorize your rifle or shotgun with this incredibly handy barrel/magazine/scope tube weaver rail clamp from Precision Pro! This accessory enables you to add a flashlight, laser sight, torch or forend grip to your firearms. This is particularly useful when your firearm does not have an underside rail from the factory. The clamp is adjustable from rimfire barrels to shotguns.

• Easy to install
• Tight mounting due to 3 adjustable screws
• 6063 Alloy composition
• 40mm Rail length
• Fits to barrels, magazine tubes or 1" tube scopes

We recommend buying the Outdoor Outfitter quick detach torch mount for this clamp on rail: web search SKU: 148027
With the torch mount, we recommend buying the Led Lenser P7 Core flashlight for this clamp on rail: web search SKU: 170262
We recommend buying the Night Saber laser sight for this clamp on rail: web search SKU: 235010

If your eyes just aren't what they used to be, or you have trouble visualizing your front sight, HiViz has the answer for you! Having the right sight makes all the difference between a solid hit and a miss so why not get one that offers a bright sight picture allowing you to have faster target acquisition? HiViz's overmolded pistol sights are suited to the demands placed on duty pistols or rugged competition guns. These sights combine the strength of our durable LightPipes with an incredibly tough resin overmold that protects the sight while allowing light to reach the LitePipe.See the light and get faster on target with the HiViz fiber optic front sight.

Specifications and Features:

Magnetic front sight for shotguns
Steel
Interchangeable LitePipes
The sight fits ventilated ribs from .218" to .328" (7/32" - 21/64", or 5.5mm - 8.3mm)

Accu-Tech Neoprene Scope Cover - Choose Size and Colour

These new Accu-Tech Neoprene Scope Covers are a must have if you are looking for some protection for your valuable scope! The Accu-Tech Neoprene Scope Cover completely encases your scope so you can rely on optimum protection from bumps and nicks during transportation. Neoprene is super hardy and incredibly durable, withstanding abrasion and creasing. The Accu-Tech Neoprene Scope Cover will protect your scope from dust, dirt and water thanks to the weatherproof/waterproof material. And a large, handy quick release loop makes the Accu-Tech Neoprene Scope Cover super easy to put on or take off, even with gloves.

Available in two sizes and two colours, you can pick the best Accu-Tech Neoprene Scope Cove to suit your scope.

Features

• Protects your scope from dirt and damage
• Extra wide design for turret protection
• Handy quick release finger loop
• Available in Olive or Black

Size

• Medium: 320mm approx. (length, not stretched)
• Large: 385mm approx. (length, not stretched)

Protect your scope with a Neoprene cover from Element Optics—a great way to keep your scope in top shape from scratches or scrapes. They also work well to keep both moisture & dust/dirt from affecting the scope while being transported. The Regular size has been designed to snugly fit over the HELIX & NEXUS. The Large size is designed for the longer and larger TITAN. 

Specifications: 

• Regular Length (Not Stretched): 365 mm
• Regular Objective Lens: 44-50 mm
• Large Length (Not Stretched): 405 mm
• Large Objective Lens: 50-56 mm

Perfect for installing Hi Viz sights for any Glock Model