All Products

You are bidding on a roll of (4"x2") cleaning cloth.

The cloth is 4 inches wide with 2 inch red lines to indicate where the cloth should be ripped, approximately 8 metres in length.

The Model 512 is the most popular model HWS. This tactical optic is perfect for agencies that want the best in CQB speed and versatility, without the need for night vision compatibility.
AA Battery model (supports Lithium and Alkaline)
65 MOA circle with 1 MOA aiming dot reticle pattern
Includes rugged aluminum hood assembly and knobbed, tool-less mounting bolt
Interfaces to 1" Picatinny (MIL-STD-1913) rail

Optics: Transmission holography - parallax free
Magnification: 1x
Eye Relief: Unlimited
Length/Width/Height: 5"x1.8"x2.25" (131x49x60 mm)
Weight: 11.5 oz (326 grams)
Temperature: -40 to 150 F (using AA lithiums); -20 to 140 F (all other battery choices)
Waterproof: Submersible to 10 ft depth
Sealing: Fogproof internal optics
Color/Finish: Non reflective black with hard coat finish
Adjustment (per click): 0.5 MOA (1/2" at 100 yds)
Adjustment Range: +/- 40 MOA travel
Mount: 1" Picatinny (MIL-STD-1913) rail
Return to Zero: Repeatable to 1 MOA after re-mounting

Heads-Up-Display Window:
Optical Surfaces: Anti-glare coating
Window Dimensions: 1.20" x 0.85" (30 x 23mm)
Front Window Material: 1/8" solid glass
Rear Window Material: Shatter resistant laminate (3/16" thick)
Field of View (100 yds): 30 yds (28m) at a 4" eye relief
Standard Reticle: 65MOA circle with quadrant ticks with 1 MOA aiming dot

Electrical:
Brightness Adjustment Range: 110,000:1 brightest to lowest
No Night Vision Compatibility
Power Source: 2x 1.5V AA batteries (supports lithium, alkaline, or rechargeable)
Battery Life: 1,000 continuous hours (lithium) at nominal setting 12; 600 continuous with AA alkaline
Brightness Settings: 20 settings with scrolling feature
Auto Battery Check Indicator: Flashing reticle upon start-up
Auto Shut-down: At 8 hrs- programmable to 4 hrs

The perfect companion for the storage of any Shotgun, handgun or rifle ammunition and much more. The lids have a rubber seal allowing for an airtight inside keeping anything inside dry and safe. With the fixed Hasp these ammo tins are easily lockable with padlock or cable lock (*not included).

Commonly referred to as the 50 calibre tin but used for grenades, 556 MM Blanks etc.

Features

• Holds up to 100x 50cal cartridges.
• Lid clamps on tightly with thick Rubber gasket
• Great for tools, ammo and other heavy items.
• Waterproof & Secure; Items inside remain safe and dry even when tin is buried.
• Fixed Hasp installed for lockable storage
• Collapsible Carry handle on top
• Stackable

Specifications:

• Volume: 9L
• Length 305 mm
• Width:155 mm
• Height 190 mm
• Weight: 2.66 Kg

All steel gun rack manufactured in China. Suitable for legally storing up to two firearms. 

Ideally suited for installing out of sight like in your roof cavity.

Features:

- Less cost and effort than a gun cabinet, locker, gun safe or cupboard

- Space efficient

- Genuine security, far preferable to wooden cabinet

- So simple to use you will lock your guns away every time

- Holds 2 - 4 guns depending on the size of the rifles

Dimensions: (L x W x H): 640mm x 50mm x 255mm

PLEASE NOTE: The police have determined that these racks require 6mm x 75mm minimum Screw size & that they not be able to be unscrewed with std tools.

This means using screws with security heads or grinding them so that they can’t be unscrewed.

The Outdoor Outfitters Torch Scope Mount for LED Lenser and Coast Torches

After getting frustrated with the lack of mounting options for the most popular LED Torches we have come up with a fantastic easy to use mount. The black anodized aluminium finish matches the torch and any standard black scope’s finish.

Simply mount the included Quick-Detach scope ring onto any 1" or 30mm scope tube. Then fit the torch mount's weaver base to the scope ring. These are easy to install and mean you can easily remove your torch for the times when you don't need it shooting.

The torch mount is 30mm in diameter. But also works on the 1” body of the Olight torch in reverse with the 1” adapter on the mount side and the 30mm ring mounted to a 30mm scope.

Includes:
• 30mm Quick-Detach Scope ring
• 1" Inserts for Scope ring
• Torch Mount to fit Fits M7, M7R, M7RX, MT7, P7, P7.2, P7QC, T7, T7.2, T7M, X7R, Coast HP7. or any 30mm Torch Body
• Allen Keys to fit.

Outdoor Optics 4x32 Adjustable Objective Air Rifle & 22 Scope This is a medium priced scope which will really satisfy the shooters needs. Focused for air rifle and 22 rifle ranges. Full size (25mm) tube of high power rifle scope. Compact size lightweight is ideally suited to smaller rifles and airguns, and has front adjustable objective. The "Duplex" reticle is the worlds most popular crosshair

Specifications:
Suggested use: air rifles & rimfire rifles
Magnification: 4x
Front Lens: 32mm
Tube size: 25.4mm
Reticle: Duplex
Exit Pupil: 8mm
Parallax: 10 - infinite yds fixed
Rear lens focus: locking ring
Adjustment: 1/4" @ 100 yards
Lens coating colour: clear
Length: 310mm
Weight: 430gms
Colour: matte black
Waterproof, shockproof, fogproof: yes
Field of view @ 100 yards: 26 feet
Adjustment: coin screw
Caps made of: polymer
Scope covers: see through with elastic bands
Made in: China

Effortless cocking with Positive locking trigger and quick pull release. 

Throws all five targets as singles or stacked doubles

Sliding adjustable clip allows for speed and direction change

rap made with steel and aluminum materials for years of durability

3 pivot mounts allows you to throw targets up to 100 yards in all directions at any angle on all planes

The Outdoor Outfitters Auto 65 Clay Target Thrower has a foot pedal release and an anti-drag arm designed to create consistently greater throws. The throw is a consistent 70 to 85-metre throw, sure to give you a smooth target feed. This thrower also has a disarm safety feature.

Features:

• 75-90 yard range
• 65 target auto feeder
• 5 to 35-degree adjustable angles
• Added safety features
• Less than 2 seconds cycle time
• Unique tray levelling system (virtually free of target breakage and always true target flight
• Safety Ring Attachment
• Targets load directly onto the steel throwing arm
• Foot Pedal Release - cord length approx. 3m

Specifications:

• Model: Auto 65
• Materials: Steel, Aluminium
• Colour: Black
• Dimensions: 635mm high x 355mm wide x 280mm deep
• Weight: 26 kg

Camo Dog Bed

Features:
- Comfortable bed for your dog
- Washable
- Camo pattern
- Removable inner
- Brushed Polyester outer
- Waterproof
- 1025 mm x 750 mm

Awesome camouflage dog bed. Filled with soft thick padding, this beds inner is easily removable so the outer can be washed when needed.

The outer layer is a soft finish brushed Polyester material which is super tough, waterproof and has a PVC Backing on the inside to stop smell seeping into the foam inner.

The Ranger AR15 1 piece Detachable Mount

This is perfect for mounting your scope forward on your AR-style rifle. The Proper Eye Position Mount provides 2" of forward scope positioning room which will allow you to obtain proper eye relief and maintain a proper shooting position. The rings also feature Pica tinny tops which allow you to mount additional accessories. Three locking screws on each ring ensures maximum lock for zero movement. Suitable for all standard 1” scopes.

Specifications:
Weight: 8.3 oz
Height: 1.0" (from rail to bottom of scope ring)
Height: 2.44" (from rail to middle of scope rings)
Width: 1.60" (rings)
Length: 4.17" (front of front ring to back of rear ring)
Length: 2.15" (between rings)

Outdoor Outfitters Rings 3/8 1" E2511Q

High Height which is great for mounting scopes with larger objectives. Suitable for upto 42mm objective on most scopes.

These are made of alloy and are perfect for mount scopes on air rifles and rimfire rifles.

Double allen key clamp

Top of base to bottom of scope 13mm

Night Saber 27 Watt 3000 Lumens Rechargeable Spotlight

Features:
- Rechargeable
- High impact resistant polymer body
- Whiter and more focused spot than halogen lights
- Lightweight for easy use with ergonomic pistol grip
- Rubber switch perfectly positioned for easy on/off.

Specification:

- Bulb: 27W Cree LED
- 120mm Lens
- Life time: 25000 hours
- Lumens: 3000
- Usage: Hunting, marine, camping, shooting
- Run time 45 minutes

Night Saber Handheld 150mm LED Spotlight

36 Watt led hand held spotlight that emits 3500 lumens. This spotlight has a deep reflector which produces a tight round beam. Capable of expanding to 500 meters plus.

Specifications:
- High Output Cree 36 Watt LED Bulb
- Ergonomic Design
- Durable ABS & Heavy Duty Nylon Construction
- Deep aluminium reflector produces a tight round beam

Features:
- Operation Voltage - 12V-24V
- Lamp Type: USA 36w Cree LED
- Reflector Size: 150mm
- Power: 36 watts
- Output: 3500 Lumens
- Lamp Life Expectancy: 50,000 Hours 
- Beam Type: Round Spot

These Outdoor Optics 4x32 scopes are one of the nicest of the value for money scopes we see. Not only are they an attractive looking scope, with their black matte finish and silver front ring, but optically they are very very good. Clear with good depth of field and the very popular duplex reticle, which is the standard found in 90% of most scopes.

The scope is fog and water proof, shock and recoil resistant, has fully coated lenses so you’ll get the clearest and sharpest picture and a good set of clear see through scope covers are also supplied. These scopes are well suited for 22, 22 Magnum, any of the 17s and could even be used on some of the smaller Centrefire rifles. The best thing of all is that they offer excellent value for money with a good warranty.

We also keep an excellent range of alloy and steel scope mounts suitable for this scope, and if you purchase the scope and rings from us, we would be more than happy to mount it for you.

Outdoor Outfitters 1" Rings

Both rings are 1" diameter. works with 1" tube scope.

Total Height: 42mm 

Height Above Base: 9mm

Fits: 21mm-26mm

Base Type: Weaver

Material: Alloy

Accutech Rifle Mount Bi Pod 9-13" Pivoting

The Accutech Bi Pods clamp to any quick detachable sling swivel stud. They have strong recoil springs to prevent damage to the stock and maintain point of impact. Accutech Bi Pod legs are adjustable for height. Manufactured with heat treated steel and hard alloy with a black anodized finish.

At the bottom of each leg is a solid rubber foot.  It also has a swivel head which allows you to keep the cross hair level when shooting on the side of the hill or in undulating country.  Once you have used a bi-pod, especially one with the swivel head like this, you will always use one for the best accuracy. 

You won't find another bi pod this good for the price.

 - Unshakable prone and bench shooting
 - Lightweight
 - Reliable and strong Harris design
 - Spring return telescoping legs
 - Pivot eliminates rifle canting or uneven terrain
 - Easily attaches to sling swivel stud
 - Retractable legs easily extend from 9-13"
 - Adjustable legs pull down effortlessly from folded position
 - Weighs 425g

Great for use with popular rifle brands such as Ruger, Remington, Winchester, Sako, Tikka, Volquartsen, Marlin, Browning, Mossberg, Anschutz, CZ, Sauer, Howa and more!

The Ranger MP-RD 1x20 Red Dot sight is a super compact multi purpose Red Dot Sight, perfect for a whole variety of weapons platforms like single-shot rifles, shotguns, and pistols! The Ranger MP-RD Red Dot fits to picatinny rails/bases and comes with two height bases. The tall base is 24mm high, the short base it 5mm high. The MP-RD is compatible with the Ranger MX3 magnifier.

Specifications:
OBJ. diameter: 20mm
Dot Size @ 100m: 5 M.O.A
Windage/Elev: 1 M.O.A
Exit Pupil: Free
Length: 74mm
Battery: 1x AAA
Reticle: Red dot with adjustible brightness
Mount: Picatinny Rail with dual height mount for pistol or shotgun.

Outdoor Outfitter Rings 3/8 1" Medium E2511B

Mdeium Height Alloy Rings

These are perfect for mount scopes on air rifles and rimfire rifles.

Allen Key include

For use with 1" diameter scope tubes

Fab Defense is one of the worlds leading manufacturers in high quality tactical accessories. Features:

Designed to hold torches with 1 1/8" diamter
Design to hold flashlights or laser devices
A Secure bolt locking system for the mounted device
Fits picatinny rails
Quick release mechanism
Tough rigid and lightweight reinforced polymer design
Special shape for easy turn-on device
Modified to fit pistol, gun, or rifle.

The Manitoba Rugged shorts are made from a tough knit backed fleece. The rugged shorts are dead silent, making them perfect for stalking animals. They are comfortable, breathable, water repellent, and will not restrict movement. Best of all, they are lightweight, at just over 220 grams.

Features:

• Micro-knit yarn with light fleece outer
• Breathable and silent
• Belt loops
• Deep front pockets
• Elastic waist
• Colour: Green

This Manitoba product comes with a 1 year guarantee of quality. If your Manitoba product is found to be faulty in any way within 1 year of purchase, we will repair or replace it.

*Please note that pictured belt is not included

Long gaiters provide maximum protection from the environment. Preventing dreaded stones and twigs working their way into your boots on your missions. The long gaiters are the perfect choice to adding to your kit for extra comfort and protection when you need it during the hunt. 

Features:
• Adjustable top for secure fit
• Large YKK zip
• Steel lace hook
• Reinforced scuff pad on ankle

Care:
• To maintain top performance of your Stoney Creek garment we recommend a regular warm washing at 40 degrees (inside out) with a non-powdered laundry detergent (Sports Wash recommended) and occasional warm tumble dry, right side out.
• A warm wash assists in killing bacteria and the warm drying for 20 minutes revives the fabric and rejuvenates the DWR and the Teflon coating ensuring going performance.
• NB: Powdered detergents have UV brightness visible to animals. We recommend reapplying DWR every two years. It is not recommended to store your garment damp, wet and scrunched.